I created this design while learning how to use my laser, it's a good simple project that creates 35, 1.2in hex pieces that can be pushed together to make abstract sculptures. They make a great desk toy or gift because you can engrave a custom logo or name on each piece to make them truly unique. I'll be giving several sets out this Christmas.
This pattern creates about 35 pieces, and the only material you'll need is a 8x8in piece of Plexiglas, which I've been able to regularly find at my local home improvement store for $1.50.
35 pieces is enough to build a 6 inch sphere, or a large abstract object. When I was giving these out as promotional items, I gave them out 7 at a time which is enough to be interesting, but only costs $0.30 in material.
This toy is not intended for young children, the edges are mildly sharp and could possibly be a choked on.
How to make:
The outline is in two portions, the "A Part" which contains the outline, and the "B Part" which contains the logo engraving. Since you'll probably want to put your own logo on, you can use the "B Part" as a template for where to align the logos.
Both parts have crop marks on the corners for testing alignment. When you are making these parts, do not move the acrylic between cutting the A part and engraving the B part, some of the hex pieces could fall out of the sheet and it would be hard to align again.
I'm sure you'll notice the main part of the design has every hex piece right against each other with no padding, so cutting the right side of one hex is cutting the left side of the adjacent piece. This helps put a lot more pieces on a small sheet, but does not account for the thickness of the cut. If the cut is very thick the notch that holds the pieces together will be too wide and the pieces will not will not hold together. If you cut a sheet and find the pieces don't hold together or are too hard to assemble, you can scale the entire sheet up or down by a small percentage.
Once you have the sheet cut you can punch out the pieces and remove all of the 3 pointed stars that the notches create.
If you make a set and make any interesting structures, send me the picture or link, I would love to see all your creations.
There is also a small cut box I created that’s perfect for keeping these in, see Folded Box.
I've also posted this design over at: thingiverse.com/thing:247
Check out the project page for updated plans and downloads.
